Pandoras box replacement control panel artwork vinyl sticker – Single Deck

Availability:

In stock


$29.00

Mix Match Bundle & Save
Mix Match Bundle & Save

Got yourself a great bargain on a Pandoras Box, your current artwork looking a bit dated, or just looking to freshen your unit up?

We’ve got you covered!

Not only do we sell Pandora box arcade machines, but we also offer pre-made ready to apply replacement control panel vinyl stickers.

Depending on stock, available designs will vary.

Our Single Deck replacement artwork vinyl stickers are made to the original spec, size, and thickness. Yes, they are thicker than regular vinyl meaning they are easier to put on with less chance of fighting bubbles during application.

They are a gloss finish and come with a protective layer that can be peeled off if desired.

Most decks are a standard size, and shape, however, please refer to pictures and measurements to ensure your deck and hole layouts match.

  • side height: 21cm
  • centre height: 20.1cm
  • width: 62.5cm
  • Left side to left joystick centre: 7.2cm
  • Right side to right joystick centre: 21.3cm

Application-wise, for ease, we recommend removing all buttons and the joystick tops, however, joysticks can remain as-is during sticker application.

Please look up some videos on vinyl application. It’s critical that your current sticker is removed (subtle heat from a hairdryer may help) and the surface of the existing console lid/deck is cleaned – we use eucalyptus oil to remove any existing residue. Once the surface is perfect and dry, place the replacement vinyl sticker down for a visual position inspection. You may wish to place some masking tape on the edges of the deck lid as an initial placement guide. You now know where your ideal position is – turn vinyl over and remove the underside exposing sticker. You will now need to carefully stretch out vinyl and place the top section onto deck/lid and gradually bring vinyl down working it from top to bottom as you go side to side :-). You should be able to use your hands or a dry cloth to spread it out from top to bottom ensuring an even application with no bubbles. If unhappy, while applying you can raise the undesired area and re-apply.

SKU: 7289501352102 Category:

Details

Brand:Anbernic
Operating System:Android & Linux

Display

Display Size:4" 4:3 ratio
Technology:IPS Touch Screen
Resolution/ Ratio:640x480

Processor CPU

Graphics Processor GPU

GPU Brand:Embedded

I/O Interface

USB:1x USB 2.0 type-C - Charge and file transfer
Audio Out:3.5mm Socket, USB-C
HDMI:No
WiFi:2.4/5G WIFI 802.11a/b/g/n/ac
Bluetooth:Bluetooth 5.0
Controls:Hall joystick, six-axis gyroscope sensor

Power

Technology:Li-polymer
Capacity:3500mAh
Life:Up to 8 hours (depending on the usage)
Charge/ Output:Type C USB charge cable

Memory/Storage

RAM (Memory):1GB DDR4
Storage Capacity:512GB
Storage Expansion:1x NVMe 2280 (Used), 1x SATA 2.5" (Empty)

Dimension/Weight

Product Dimensions:(L x W x H): 16.3 x 7.6 x 1.6 cm
Product Weight:413gr

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Shipped from Melbourne- Bundle & Save - Check your cart for extra savings!

X